Magnetic Cores For Photovoltaic Inverters
  • Magnetic Cores For Photovoltaic Inverters
  • Magnetic Cores For Photovoltaic Inverters
  • Magnetic Cores For Photovoltaic Inverters

Magnetic Cores For Photovoltaic Inverters

The air-atomized iron-silicon-aluminum (Sendust) magnetic ring, specially designed for photovoltaic inverters, is a highly representative core magnetic component in the field of new-energy power electronics. As the trend toward integrated solar-storage systems deepens, photovoltaic inverters are placing increasingly higher demands on magnetic components in terms of their ability to withstand harsh operating conditions and achieve long service lives. Thanks to its unique material formulation and advanced manufacturing processes, the air-atomized iron-silicon-aluminum magnetic ring perfectly meets these requirements. Due to the distinctive characteristics of photovoltaic systems, magnetic rings used in photovoltaic inverters must be capable of withstanding severe power fluctuations, high-frequency switching, and adaptation to demanding outdoor environments.

Magnetic Cores For Photovoltaic Inverters

Pain Point

1. System Stability Under Peak Solar Irradiance

Pain Point: PV inverter output fluctuates with sunlight. During peak irradiance, instantaneous high currents can cause traditional cores to enter "hard saturation," leading to abrupt inductance drops and potential system shutdowns.

Our Solution: Powered by the gas-atomization process, our micron-sized spherical powders achieve superior densification during sintering, delivering a saturation flux density (Bs) exceeding 1.0 T. This ensures robust resistance to DC bias, preventing magnetic saturation and guaranteeing stable operation under peak high-current conditions.

2. Thermal Management & High-Frequency Efficiency

Pain Point: As inverter switching frequencies increase (10 kHz to 1 MHz), traditional cores suffer from severe eddy-current and hysteresis losses. This causes excessive heating, dragging down overall conversion efficiency and complicating thermal design.

Our Solution: Combined with advanced insulation coating processes, our spherical powders effectively block high-frequency eddy current paths between particles. This drastically reduces core losses in the 10 kHz–1 MHz range, minimizing conversion heating and boosting overall inverter efficiency.

3. Long-Term Reliability in Harsh Outdoor Environments

Pain Point: Outdoor PV inverters face extreme seasonal temperature variations and self-generated heat. Engineers worry about performance drift and permeability degradation in ordinary cores, which threatens the 25-year lifecycle return of the power station.

Our Solution: The perfect spherical structure from gas-atomization effectively prevents internal oxidation during sintering, ensuring a pure and stable microstructure. This grants our cores outstanding temperature stability, maintaining highly consistent key parameters across a wide temperature range and eliminating long-term reliability anxiety.


Product Introduction

Material Properties and Advantages

1. Extremely high saturation magnetic flux density (Bs)                                                               

The output power of photovoltaic systems varies with light intensity. When sunlight is at its strongest, the inverter must handle instantaneous peak currents. Therefore, its Bsat must exceed 1.0 T to ensure it can withstand the sudden high peak currents from the PV system without magnetic saturation, thus guaranteeing stable operation even under high-power conditions.

2. Extremely low high-frequency loss                                              

In the high-frequency band from 10 kHz to 1 MHz, it exhibits excellent control over eddy-current losses and hysteresis losses, effectively reducing energy losses during the conversion process and enhancing overall efficiency.

3.Excellent temperature stability                                        

The application scenarios are mostly outdoors, where temperatures vary throughout the year. Meanwhile, the device itself generates heat during operation. Therefore, its key performance parameters must remain highly stable over a very wide temperature range.

The Support of Technology

“Aerosolization” is a key preparation process for enhancing the performance of iron-silicon-aluminum magnetic rings. Through aerosolization, the raw materials are transformed into micron-sized spherical powders.

Spherical powders exhibit better densification and performance stability during sintering, effectively preventing oxidation.

Combined with the insulation coating process, the eddy current paths between magnetic powder particles are blocked, further reducing high-frequency losses and enabling superior performance in high-frequency operating environments.

Core Applications in Photovoltaic Inverters

3.1.jpg

l Inductor for Power Factor Correction (PFC) Circuit: The PFC circuit is responsible for improving the quality of the input current waveform. The high DC bias characteristics of this magnetic ring ensure stable permeability even under high-current operating conditions, thereby preventing efficiency degradation caused by magnetic saturation.

l Boost and Inverter Inductors

l Electromagnetic Compatibility (EMC) Filtering: By employing common-mode/differential-mode filtering designs and leveraging their high magnetic permeability, the impedance in the low-frequency band is significantly enhanced, effectively suppressing conducted interference on the power lines, thereby ensuring safe grid connection of the inverter.

About Us

Established in 2014, our company is a high-tech enterprise specializing in the R&D and production of alloy soft magnetic powders and metal powder cores. Through years of independent R&D, we have mastered the preparation technologies for vacuum-crushed powders, vacuum-atomized powders, gas-atomized amorphous powders, and ultra-fine powders, as well as the core manufacturing technologies for powder cores. To date, the company holds 33 authorized patents and has been consecutively awarded national and provincial honors.

Today, our facility covers an area of over 62 mu (approx. 10 acres), with an annual production capacity of 5,000 tons of alloy soft magnetic powders and 800 tons of alloy soft magnetic powder cores. Since our inception, we have adhered to the business philosophy of "Quality First" and have successfully obtained ISO14001:2015, ISO45001:2018, and ISO9001:2015 system certifications. Our products are primarily applied in power electronics industries, including photovoltaic inverters, new energy vehicles (NEVs), EV charging stations, high-end home appliances, UPS power supplies, and communication electronics. Additionally, we provide insulation granulation treatments tailored to your performance and molding needs, delivering comprehensive solutions for our clients.Both our products and services have earned high recognition from our customers.

3&1.png

FAQ:

Q1: Why is the air-atomized iron-silicon-aluminum (Sendust) magnetic ring highly recommended for photovoltaic inverters?

A: Photovoltaic systems face severe power fluctuations and outdoor temperature variations. Our magnetic ring features an extremely high saturation magnetic flux density (Bs > 1.0 T) and excellent temperature stability. This ensures it can withstand sudden high peak currents from the PV system without magnetic saturation, while maintaining stable performance in harsh outdoor environments, thereby guaranteeing the inverter's long-term reliability.

Q2: How does the "aerosolization" process improve the performance of the magnetic core?

A: Aerosolization transforms the raw materials into micron-sized spherical powders. These spherical particles exhibit better densification and performance stability during sintering, while effectively preventing oxidation. When combined with our advanced insulation coating process, it blocks eddy current paths between the magnetic powder particles, significantly reducing high-frequency losses and enabling superior performance in high-frequency operating environments.

Q3: What specific benefits does this magnetic ring bring to the PFC and EMC circuits of an inverter?

A: In Power Factor Correction (PFC) circuits, the magnetic ring's high DC bias characteristics ensure stable permeability even under high-current conditions, preventing efficiency drops caused by magnetic saturation. For Electromagnetic Compatibility (EMC) filtering, its high magnetic permeability significantly enhances impedance in the low-frequency band, effectively suppressing conducted interference on power lines and ensuring safe, stable grid connection.

Q4: Can you provide customized solutions for our specific photovoltaic inverter designs?

A: Yes, absolutely. Beyond our standard products, we provide comprehensive customized solutions. We offer insulation granulation treatments tailored to your specific performance and molding needs. With an annual capacity of 5,000 tons of alloy soft magnetic powders and 800 tons of powder cores, backed by ISO9001, ISO14001, and ISO45001 certifications, we can reliably meet your customized requirements.


After-Sales Service Commitment

1. Rapid Response Mechanism
  • Time is critical in business. We promise to acknowledge your inquiries within 2 hours during working days and provide a preliminary solution within 48 hours. Our dedicated after-sales team is always on standby to ensure smooth communication.

Please note that due to time zone differences, our response may be slightly delayed. We appreciate your patience and understanding.


2.Strict Quality Guarantee

  • Quality is our cornerstone. If any quality defects occur due to our manufacturing process, we take full responsibility. We will offer free replacements, repairs, or refunds in the next shipment based on your preference and the severity of the issue.

  • 3. Transparent Complaint Handling

  • We value every piece of feedback. In case of any disputes, we will investigate the issue transparently and fairly within 48 hours, ensuring a satisfactory resolution that protects your interests and builds long-term trust.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right