Supersaturated Flux Density (1.5T) Toroids
The company's aerosolised sendust magnetic core achieves a balance between supersaturated magnetic flux density (Bs≥1.05T) and low loss through the technological innovation of the three-in-one composition-process-coating, and has significant competitiveness in new energy, industrial power supply and other fields.
Pain Point
1. Breaking the Limits of Miniaturization
Pain Point: In NEVs (e.g., OBC, vehicle inductors) and renewable energy converters, internal space is extremely limited. Traditional Sendust cores typically have a saturation flux density (Bs) of only ~1.0T, forcing engineers to use bulky cores to handle high currents, which severely restricts high power-density and lightweight designs.
Our Solution: Through our innovative "Composition-Process-Coating" three-in-one technology, we have shattered the traditional 1.05T physical ceiling, pushing the Bs value to 1.40–1.60T (exceeding 1.52T in specific designs). This allows engineers to significantly reduce the volume and weight of magnetic components, perfectly meeting the extreme miniaturization demands of high power-density equipment.
2. Preventing Hard Saturation Under High Currents
Pain Point: Magnetic conductivity is not infinite. In high-current industrial power supplies, when the external magnetic field reaches a critical point, traditional cores enter "hard saturation," causing an abrupt inductance collapse that leads to system control chaos or catastrophic failure.
Our Solution: Benefiting from precise composition optimization and process regulation, our gas-atomized cores offer an ultra-high Bs of up to 1.5T. This massive upper limit provides a huge safety buffer, ensuring outstanding DC bias resistance and stable operation even under severe transient high-current impacts.
3. Balancing High Bs with Low High-Frequency Losses
Pain Point: In magnetic materials, high saturation flux density often comes with high losses. Engineers face a dilemma: choosing high-Bs materials to save space usually means accepting severe eddy-current heating at high frequencies, sacrificing overall efficiency.
Our Solution: We achieve high Bs without compromising efficiency. Through insulation coating innovation, we effectively block high-frequency eddy current paths while boosting the Bs value. This delivers the perfect balance of supersaturated flux density and ultra-low losses, ensuring high conversion efficiency in compact designs.
Product Introduction
The company's aerosolised sendust magnetic core achieves a balance between supersaturated magnetic flux density (Bs≥1.05T) and low loss through the technological innovation of the three-in-one composition-process-coating, and has significant competitiveness in new energy, industrial power supply and other fields. The supersaturated magnetic flux density (Bs) of aerosolised iron-silicon aluminium powder refers to the fact that the saturated magnetic flux density is significantly higher than the typical value of traditional iron-silicon aluminium cores (typically 1.0T) through composition optimisation and process regulation. According to the latest research and process practices, its supersaturated Bs values can reach 1.40-1.60T, and even exceed 1.52T under specific component designs. Here are the key technical details and performance characteristics: The supersaturated magnetic flux density of aerosolised iron-silicon aluminium powder has exceeded the BS limit (1.05T) of traditional iron-silicon aluminium cores through composition optimisation, process regulation, and insulation technology innovation, reaching 1.40-1.60T. In the future, with the development of nanotechnology and composite technology, supersaturated iron-silicon aluminium powder cores are expected to further expand application scenarios and promote the miniaturisation and efficiency of power electronic devices.
Core performance indicators of soft magnetic materials: The higher the Bs, the higher the magnetic flux density of the material, which can reduce the core volume and circuit loss, making it suitable for high-current, high-power scenarios (such as new energy converters and vehicle inductors). The core function of the core is "magnetic conductivity", but its magnetic conductivity is not infinite. When the strength of the externally applied magnetic field (H) gradually increases, the magnetic flux density inside the core (B, which reflects the "strength" of the magnetic field) will first rise rapidly; however, when the magnetic field strength increases to a certain critical value, the increase in magnetic flux density will become extremely slow, and eventually tend to a "maximum value", which is the saturated magnetic flux density (expressed in Bs in Tesla T).
About Us
Our facility covers an area of over 62 mu (approx. 10 acres), with an annual production capacity of 5,000 tons of alloy soft magnetic powders and 800 tons of alloy soft magnetic powder cores. Since our inception, we have adhered to the business philosophy of "Quality First" and have successfully obtained ISO14001:2015, ISO45001:2018, and ISO9001:2015 system certifications. Our products are primarily applied in power electronics industries, including photovoltaic inverters, new energy vehicles (NEVs), EV charging stations, high-end home appliances, UPS power supplies, and communication electronics. Both our products and services have earned high recognition from our customers.



FAQ:
Q1: How does your aerosolised Sendust (iron-silicon-aluminum) core compare to traditional ones in terms of saturation flux density (Bs)?
A: Through technological innovations in composition, process, and coating, our aerosolised Sendust core significantly exceeds the typical 1.0T limit of traditional iron-silicon-aluminum cores. While our standard product achieves a highly competitive Bs of ≥1.05T, our advanced process regulation allows the supersaturated Bs to reach 1.40-1.60T (and even exceed 1.52T under specific designs). This makes it highly suitable for high-current and high-power scenarios.
Q2: What exactly is "saturation flux density (Bs)", and why is a higher Bs value so important?
A: Bs reflects the maximum magnetic flux density a core can handle. You can think of it as the core's magnetic "capacity limit." When the external magnetic field increases to a certain point, the core can no longer hold more magnetic flux and becomes "saturated." A higher Bs means the core can withstand much stronger magnetic fields and higher currents without saturating, which is crucial for maintaining circuit stability and preventing failure in high-power applications.
Q3: What are the practical benefits of using a high-Bs aerosolised Sendust core for our power devices?
A: A higher Bs value allows you to significantly reduce the physical volume of the core while handling the same or higher power levels. This directly translates to smaller circuit losses and enables the miniaturisation of power electronic devices. It is an ideal solution for demanding fields like new energy converters, EV inductors, and industrial power supplies.
Q4: What is your company's production capacity and quality assurance for these advanced magnetic materials?
A: As a high-tech enterprise, we operate a facility covering over 62 mu (approx. 10 acres) with an annual production capacity of 5,000 tons of alloy soft magnetic powders and 800 tons of powder cores. We strictly adhere to ISO9001:2015, ISO14001:2015, and ISO45001:2018 standards. Our high-performance products are widely and successfully deployed in photovoltaic inverters, new energy vehicles (NEVs), EV charging stations, UPS power supplies, and communication electronics.
After-Sales Service Commitment
Time is critical in business. We promise to acknowledge your inquiries within 2 hours during working days and provide a preliminary solution within 48 hours. Our dedicated after-sales team is always on standby to ensure smooth communication.
Please note that due to time zone differences, our response may be slightly delayed. We appreciate your patience and understanding.
2.Strict Quality Guarantee
Quality is our cornerstone. If any quality defects occur due to our manufacturing process, we take full responsibility. We will offer free replacements, repairs, or refunds in the next shipment based on your preference and the severity of the issue.
We value every piece of feedback. In case of any disputes, we will investigate the issue transparently and fairly within 48 hours, ensuring a satisfactory resolution that protects your interests and builds long-term trust.








