Magnetic Cores For Switching Regulator Power Supplies
  • Magnetic Cores For Switching Regulator Power Supplies
  • Magnetic Cores For Switching Regulator Power Supplies
  • Magnetic Cores For Switching Regulator Power Supplies

Magnetic Cores For Switching Regulator Power Supplies

Switching Regulator Power Supply, also commonly known as switching power supply, is a power supply that uses modern power electronics technology to maintain a stable output voltage by controlling the ratio of the time that the switch is turned on and off.

Magnetic Cores For Switching Regulator Power Supplies

Pain Point

1. Thermal Management & Extended System Lifespan

Pain Point: As switching power supplies evolve toward higher frequencies, traditional iron powder cores suffer from severe eddy-current losses. This causes excessive heating, drags down overall conversion efficiency, and significantly shortens the service life of electronic equipment.

Our Solution: Sendust cores exhibit significantly lower losses at high frequencies compared to iron powder cores. This enhances conversion efficiency, minimizes energy waste, and fundamentally reduces heat generation, thereby improving system reliability and extending service life.

2. Preventing Saturation Under Dynamic Loads

Pain Point: In computers and communication equipment, sudden load changes can cause traditional cores to enter magnetic saturation. This leads to failed energy storage, output voltage drops, system crashes, or even damage to expensive downstream precision components.

Our Solution: With a saturation flux density of approximately 1.05T, Sendust cores easily withstand rapid current changes and large fluctuations without saturating. This ensures stable energy storage and transmission, guaranteeing consistent output voltage under varying load conditions.

3. Superior DC Bias & Zero-Acoustic Noise

Pain Point: In PFC circuits with high DC bias, ordinary cores suffer severe performance degradation. Additionally, traditional cores generate piercing high-frequency whining due to magnetostriction, failing the strict acoustic requirements of silent power supplies and precision instruments.

Our Solution: Sendust cores offer superior DC bias capability, making them ideal for PFC circuits. Furthermore, featuring a near-zero magnetostriction coefficient, they experience virtually no dimensional changes under varying magnetic fields, completely eliminating acoustic noise for precision electronics.


Product Introduction

Overview of Switching Regulator Power Supplies

Switching Regulator Power Supplies (switching power supplies) utilize modern power electronics to maintain a stable output voltage by controlling the on/off switching ratio. Achieving efficiencies of 80%–90% (significantly higher than the 30%–50% of traditional linear power supplies), they are widely used in high-efficiency applications like computers and communication equipment. They also offer flexible voltage regulation, providing stable DC outputs across wide input fluctuations (e.g., 100V–240V AC).
Key Benefits of Sendust Cores in Switching Regulators
  1. Ultra-Low High-Frequency Losses: Sendust cores exhibit significantly lower losses than iron powder cores at high frequencies. This enhances conversion efficiency, minimizes energy waste, and reduces heat generation, thereby improving system reliability and extending service life.

  2. High Saturation Flux Density: With a saturation flux density of approximately 1.05T, Sendust cores easily withstand rapid current changes and large fluctuations without saturating. This ensures stable energy storage, transmission, and output voltage under varying load conditions.

  3. Excellent Temperature Stability: Iron-silicon-aluminum (Sendust) cores maintain stable permeability and loss characteristics across a wide temperature range. This guarantees consistent and reliable operation of switching regulators in diverse ambient environments.

  4. Superior DC Bias Capability: Sendust cores can withstand high DC bias currents without significant degradation in magnetic properties. This makes them ideal for circuits with DC components, such as Power Factor Correction (PFC) circuits.

  5. Silent Operation: Featuring a near-zero magnetostriction coefficient, these cores experience virtually no dimensional changes under varying magnetic fields. This eliminates magnetostrictive noise, making them perfect for silent power supplies and precision electronic equipment.

  6. High Cost-Effectiveness: While slightly more expensive than some standard materials, Sendust cores offer exceptional long-term value. Their superior performance and reliability reduce the need for additional cooling or design modifications, ultimately lowering the overall system cost.

FAQ:

Q1: Why should I choose Sendust (Iron-Silicon-Aluminum) cores over traditional iron powder cores for switching regulators?

A: Sendust cores offer significantly lower high-frequency losses compared to iron powder cores. This reduces heat generation and improves overall conversion efficiency. Additionally, they feature a higher saturation flux density (approx. 1.05T) and superior DC bias capability, making them highly stable and reliable under varying load conditions.
Q2: Will the magnetic core produce audible noise during operation?
A: No. Sendust cores feature a near-zero magnetostriction coefficient, meaning they experience virtually no dimensional changes under varying magnetic fields. This eliminates magnetostrictive noise, making them the perfect choice for silent power supplies and precision electronic equipment.
Q3: What are the main applications for your metal powder cores?
A: Our high-performance metal powder cores are widely used in high-efficiency applications. Key sectors include photovoltaic (PV) inverters, new energy vehicles (NEVs), EV charging stations, UPS power supplies, high-end home appliances, and telecommunications electronics.
Q4: Do you offer customized solutions for specific project requirements?
A: Yes, we provide comprehensive customized services. We can tailor the core compositions and production processes to meet your specific performance and application needs. Please contact us directly to discuss your project details.
Q5: How do you ensure the quality and reliability of your products?

A: As a high-tech enterprise established in 2014, we strictly adhere to ISO9001, ISO14001, and ISO45001 international management standards. With an annual capacity of 5,000 tons of magnetic powder and 800 tons of powder cores, we treat quality as the cornerstone of our partnerships, ensuring stable performance for global customers.

Q6:Flexible Lead Times

· Standard Items: 7-15 Days. Ready for rapid shipment.

· Custom Items: 25-40 Days (12-16 weeks for complex parts). Precision crafted for top quality.

· Urgent Orders: Expedited production available to meet your tight deadlines.

      Exact lead times are evaluated based on your specific drawings and order volume. Contact us for a tailored solution!

Q7:Safe Transit Guarantee
We understand the unique logistics challenges of exporting magnetic products. To ensure your goods arrive safely and pass customs smoothly, we provide a comprehensive packaging and compliance solution:

· IATA-Compliant Shielding: We utilize professional magnetic shielding materials to effectively block magnetic field leakage, ensuring 100% compliance with aviation security inspections.

· Custom Shockproof Protection: Products are fully wrapped in high-density EPE foam and placed in custom-molded slots. Multiple items are strictly separated by layers, eliminating any shifting or collision during transit.



About Us

Since our establishment in 2014, we have grown into a high-tech enterprise integrating R&D and manufacturing, dedicated to providing global customers with high-performance soft magnetic alloy powders and metal powder core solutions.

Covering an area of over 62 mu, our facility boasts an annual production capacity of 5,000 tons of magnetic powder and 800 tons of powder cores. We strictly adhere to the ISO9001, ISO14001, and ISO45001 international management standards, always considering quality as the cornerstone of our partnerships.

3&1.png

Our products have been successfully applied in key sectors, including PV inverters, new energy vehicles (NEVs), EV charging stations, high-end home appliances, UPS power supplies, and telecommunications electronics. Additionally, we offer customized services, tailoring core compositions and production pr

Welcome to contact us for more information!

After-Sales Service Commitment

1. Rapid Response Mechanism
  • Time is critical in business. We promise to acknowledge your inquiries within 2 hours during working days and provide a preliminary solution within 48 hours. Our dedicated after-sales team is always on standby to ensure smooth communication.

Please note that due to time zone differences, our response may be slightly delayed. We appreciate your patience and understanding.

2.Strict Quality Guarantee


  • Quality is our cornerstone. If any quality defects occur due to our manufacturing process, we take full responsibility. We will offer free replacements, repairs, or refunds in the next shipment based on your preference and the severity of the issue.


3. Transparent Complaint Handling
  • We value every piece of feedback. In case of any disputes, we will investigate the issue transparently and fairly within 48 hours, ensuring a satisfactory resolution that protects your interests and builds long-term trust.



Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right