Aerosolised Ferrosilicon Magnetic Coress For Server Power Supplies
  • Aerosolised Ferrosilicon Magnetic Coress For Server Power Supplies
  • Aerosolised Ferrosilicon Magnetic Coress For Server Power Supplies
  • Aerosolised Ferrosilicon Magnetic Coress For Server Power Supplies

Aerosolised Ferrosilicon Magnetic Coress For Server Power Supplies

In server power supplies, power factor correction is required to improve the efficiency of power utilisation and reduce harmonic pollution to the grid. Ferrosilicon cores are ideally suited for use as core material for PFC inductors due to their high saturation flux density and low loss characteristics.

Download

Aerosolised Ferrosilicon Magnetic Coress For Server Power Supplies

Customer Pain Points

1. Thermal Management & Energy Efficiency

Pain Point: High-density server racks leave minimal space for cooling. Traditional cores suffer from high core losses at high frequencies, causing severe internal heating and dragging down conversion efficiency.

Our Solution: We utilize a secondary composite insulation coating process (e.g., aluminum phosphate + silica sol) on gas-atomized particles. This drastically increases electrical resistivity and blocks high-frequency eddy current paths, minimizing core losses at the source, boosting efficiency, and alleviating the cooling burden.

2. System Stability Under Transient Surges

Pain Point: Server startups or sudden AI computing load spikes cause massive transient current surges. Ordinary cores easily enter "hard saturation" under high DC bias, leading to abrupt inductance drops and unexpected server reboots.

Our Solution: By applying high-pressure molding to optimized particle size distributions, we maximize packing density and push the saturation flux density to 1.6T. Combined with the naturally distributed micro-air gaps formed between insulated particles, our cores safely handle massive transient currents without saturating.

3. EMI Suppression & Silent Operation

Pain Point: High-frequency switching in server power supplies triggers magnetostriction, causing piercing acoustic whining. Poor anti-interference capabilities also allow leakage flux to disrupt sensitive motherboard signals.
Our Solution: We employ a precision low-stress annealing process post-pressing to release internal lattice strain, achieving near-zero magnetostriction to eliminate acoustic noise. Furthermore, the distributed micro-air gaps provide excellent self-shielding, effectively filtering high-frequency noise and reducing output ripple voltage.


Product Introduction

Key Applications of Ferrosilicon Cores in Server Power Supplies
1. Power Factor Correction (PFC) Inductors
Server power supplies require PFC to maximize energy efficiency and minimize harmonic pollution. Thanks to their high saturation flux density and low core loss, ferrosilicon cores are ideal for PFC inductors. They easily withstand significant current fluctuations, effectively reducing the phase difference between input current and voltage. This improves the power factor, reduces reactive power, and ultimately boosts overall energy efficiency.
2. Energy Storage Inductors
Servers demand massive, instantaneous current outputs during startup or sudden load spikes. Ferrosilicon cores serve as excellent energy storage inductors, acting as an "energy buffer." They store energy during normal operation and release it instantly when high current is required, ensuring a stable and reliable power supply output.
3. Filter Inductors
To guarantee the flawless operation of internal server components, the power supply must maintain a stable DC voltage. Ferrosilicon filter inductors effectively eliminate high-frequency noise and stray waves. Their distributed air gap structure and stable frequency characteristics ensure superior filtering performance, significantly reducing output ripple voltage and improving overall power quality.
4. Transformer Cores
In certain server power supply transformers, ferrosilicon cores provide high permeability and low magnetic loss, resulting in highly efficient energy conversion with minimal heat generation. Additionally, their near-zero magnetostrictive coefficient eliminates mechanical vibration and acoustic noise, greatly enhancing the reliability and operational stability of the power supply.

Core Advantages of Ferrosilicon Cores in Server Power Supplies
1. High Saturation Flux Density
Ferrosilicon cores can handle high magnetic flux, allowing them to transmit more energy within the same volume. This prevents magnetic saturation under high-current conditions, ensuring stable power delivery even under heavy server loads.
2. Ultra-Low Core Loss
Operating at high frequencies, server power circuits are highly sensitive to magnetic core losses. Ferrosilicon cores exhibit exceptionally low losses at high frequencies, minimizing energy waste and heat generation. This not only improves power conversion efficiency but also reduces the cooling burden, lowering the server's overall energy consumption.
3. Distributed Air Gap Structure
The naturally distributed air gap allows windings to handle large DC bias currents without saturating the core. This ensures stable performance under complex transient current conditions, significantly enhancing the power supply's anti-interference capabilities and adaptability.
4. Near-Zero Magnetostriction
With a magnetostrictive coefficient close to zero, these cores experience minimal dimensional changes during operation. This effectively eliminates acoustic noise and vibration, creating a quieter working environment for servers while maintaining long-term performance stability and extending the core's service life.
5. Excellent Temperature & Frequency Stability
Server power supplies operate under varying thermal and frequency conditions. Ferrosilicon cores maintain highly stable performance across a wide temperature and frequency range, preventing performance degradation and ensuring long-term system reliability.
6. Outstanding Cost-Effectiveness

Aerosolised Ferrosilicon Magnetic Coress For Server Power Supplies

About Us

Established in 2014, our company is a high-tech enterprise specializing in the R&D and production of alloy soft magnetic powders and metal powder cores. Through years of independent R&D, we have mastered the preparation technologies for vacuum-crushed powders, vacuum-atomized powders, gas-atomized amorphous powders, and ultra-fine powders, as well as the core manufacturing technologies for powder cores. To date, the company holds 33 authorized patents and has been consecutively awarded national and provincial honors.

Today, our facility covers an area of over 62 mu (approx. 10 acres), with an annual production capacity of 5,000 tons of alloy soft magnetic powders and 800 tons of alloy soft magnetic powder cores. Since our inception, we have adhered to the business philosophy of "Quality First" and have successfully obtained ISO14001:2015, ISO45001:2018, and ISO9001:2015 system certifications. Our products are primarily applied in power electronics industries, including photovoltaic inverters, new energy vehicles (NEVs), EV charging stations, high-end home appliances, UPS power supplies, and communication electronics. Both our products and services have earned high recognition from our customers.

3&1.png

Customization Services

In addition to our standard catalog, we specialize in customizing cores to meet your specific requirements. We can tailor both the material composition and manufacturing process to optimize performance for your application. Please contact us to discuss your custom needs.

Sample Policy

 We highly encourage sampling before bulk orders to ensure our products perfectly match your design. Standard samples are usually provided free of charge (freight collect). For customized samples, a reasonable mold or processing fee may apply, which can be refunded against future bulk orders.


Minimum Order Quantity - MOQ

We offer flexible MOQs to accommodate both prototype testing and mass production. For standard catalog items, the MOQ is typically 1000 pieces. For customized or newly developed products, we will work with you to determine a reasonable MOQ based on your specific project requirements.

 Flexible Lead Times

· Standard Items: 7-15 Days. Ready for rapid shipment.

· Custom Items: 25-40 Days (12-16 weeks for complex parts). Precision crafted for top quality.

· Urgent Orders: Expedited production available to meet your tight deadlines.

? Exact lead times are evaluated based on your specific drawings and order volume. Contact us for a tailored solution!



After-Sales Service Commitment

1. Rapid Response Mechanism
  • Time is critical in business. We promise to acknowledge your inquiries within 2 hours during working days and provide a preliminary solution within 48 hours. Our dedicated after-sales team is always on standby to ensure smooth communication.

Please note that due to time zone differences, our response may be slightly delayed. We appreciate your patience and understanding.


2.Strict Quality Guarantee

  • Quality is our cornerstone. If any quality defects occur due to our manufacturing process, we take full responsibility. We will offer free replacements, repairs, or refunds in the next shipment based on your preference and the severity of the issue.

  • 3. Transparent Complaint Handling

  • We value every piece of feedback. In case of any disputes, we will investigate the issue transparently and fairly within 48 hours, ensuring a satisfactory resolution that protects your interests and builds long-term trust.



Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right